Local Repair FinderAtlanta home repair guide

A breaker that keeps tripping

Atlanta, Fulton & DeKalb · Reviewed November 2026 · Checked against 7 public sources

Breaker trouble, a burning smell or a panel upgrade?

Talk to a local electrician now. Free, no obligation.

Phone line opening soon
  • Free to call
  • No obligation
  • Local Atlanta companies
  • Ask for a written quote

Have this ready when you call

  • Your address
  • What lost power or keeps tripping
  • Anything warm, buzzing or smelling of burning

Reset a tripped breaker once. If it trips again straight away, leave it off; that points to a short or a ground fault rather than an overload. Atlanta's summers, with a July normal high of 90.1 °F, put long hours on air conditioners, so a breaker that only trips when the AC starts deserves a technician's look. Repairing branch circuits needs a City electrical permit.

An open electrical breaker panel in a garage

Key facts

Reset
Once only
Trips instantly
Likely short or ground fault: leave off, call
Trips after a while
Often an overload: move some loads
Permit
City of Atlanta electrical permit for branch circuit work
License
Division of Electrical Contractors

Read the pattern

When it tripsWhat it suggestsYour move
After a space heater, hair dryer or microwave has run a whileToo much on one circuitUnplug some things and move them to another circuit
The instant you reset itA short circuitLeave it off and call an electrician
When one appliance switches onA fault in that appliance or its cordUnplug it and try the breaker again
When the AC or heat pump startsA problem in the unit or its circuitLeave it off and call an HVAC technician
A GFCI or AFCI breaker trips in wet weatherMoisture in an outdoor outlet or a damaged wireKeep it off and have the circuit checked

Signs to get out, not reset

A burning smell, scorch marks, a panel that feels hot or sparks at an outlet: switch nothing on, leave and call 911 if there's smoke or fire.

Is it the grid?

If the lights flicker across the neighborhood or the whole street goes dark, it's Georgia Power's side. Report it at 888-891-0938. For a downed line, stay away and call 911 or Georgia Power at 1-888-891-0938.

Fixing it properly

The City's electrical permit form lists "Installing, modifying, servicing, or repairing Services, Feeders, or Branch Circuits" as permitted work, so rewiring a faulty circuit falls under a permit. An owner can pull it with a Homeowner's Affidavit if they'll live there at least 12 months afterward and do the work themselves. Otherwise, hire an electrician licensed by the Division of Electrical Contractors and check the Georgia Secretary of State license lookup. If the answer is a bigger panel, Fixr's national figure for upgrading to 200 amp service is $1,800 to $4,500.

What a repair usually costs

National ranges from cost publishers, not Atlanta quotes. The fault decides the price, so ask for it in writing before work starts.

JobNational rangeSource
Replacing a circuit breaker$100 to $260HomeGuide

When you call: 4 questions to ask

  1. What's your license number with the Division of Electrical Contractors?
  2. Will you pull the City electrical permit for this service or circuit work?
  3. Will the panel have room for a heat pump or car charger later?
  4. Is the trip charge credited if I go ahead?

A fair written quote shows the panel or parts, labor, the permit, and any extra circuits priced on separate lines. Check any contractor's license on the Georgia Secretary of State license lookup before work starts.

What happens when you call

  1. You're connectedStraight to a local electrician that serves your area and takes calls like yours.
  2. You get a priceDescribe the problem, ask for a written quote and their license number. No obligation.

Want a price for your home? Call a local electrician for a written quote.

Phone line opening soon

Common questions

Why does my breaker keep tripping?

Usually an overload, a short circuit, a faulty appliance or a ground fault. A breaker that trips again the moment you reset it points to a short; leave it off and call an electrician.

Is it safe to keep resetting a breaker?

No. Reset it once. If it trips again, the breaker is protecting you from a fault.

Does circuit repair need a permit in Atlanta?

The City's electrical permit form covers installing, modifying, servicing or repairing branch circuits.

Related guides

Sources

  1. Wikipedia: Geography of Atlanta, climate table citing NOAA
  2. Georgia Power: Outages and storm center
  3. City of Atlanta Office of Buildings: Electrical permit application
  4. City of Atlanta: Homeowner's Affidavit form
  5. Georgia Secretary of State: About the Georgia State Board of Electrical Contractors
  6. Georgia Secretary of State: License lookup and verification
  7. Fixr: Electrical panel upgrade cost

Costs are typical ranges. Your quote depends on your home. Rules and rebates change; check the original source before you rely on a figure. Something wrong? Tell us via the contact on the Impressum page.