Local Repair FinderColumbus home repair guide

Water heater leaking

Columbus & Franklin County · Reviewed November 2026 · Checked against 7 public sources

Close the cold water valve above the heater. Turn the gas control to Off, or switch off the breaker for an electric heater. Then work out where the water is coming from: a fitting can often be fixed, a leaking tank can't. Replacing a hot water tank in Columbus requires a permit, but not plan review.

Key facts

1. Water
Close the cold supply valve above the heater
2. Fuel
Gas control to Off, or electric breaker off
Leak from a fitting
Often repairable
Leak from the tank
Replacement
Gas tank, installed
$1,000–$2,700 (national average range, Fixr)
Permit
Replace a hot water tank: permit, no plan review
  1. Close the cold supply. It's the valve on the pipe going into the top of the heater. If it won't turn, close the house main shutoff.
  2. Turn off the fuel. Gas heater: turn the control knob to Off. Electric heater: switch off its breaker. If you smell gas, leave the house and call 911 and Columbia Gas of Ohio at 1-800-344-4077 from outside.
  3. Supply closed and fuel off, but water still coming? Call a Columbus plumber, then finish the steps.

    Phone line opening soon

    Have this ready when you call

    • Your address
    • Where the water is and whether the main is off
    • When it started
  4. Find the leak. Dry the area and look. Top connections, the relief valve, the drain valve near the bottom, or the tank itself.
  5. Protect the floor. Move boxes, put down towels, and if there's a floor drain, make sure nothing blocks it.
  6. Drain if a plumber asks you to. Water inside is scalding. Use a hose to a floor drain, and only after the heater has cooled.
Water pooling in a drain pan around the base of a water heater

Where it leaks decides what happens

Leak fromWhat it usually means
Pipe fittings at the topLoose or corroded connection; often repairable
Relief valve or its pipeValve faulty, or pressure or temperature too high; needs a plumber
Drain valveValve not fully closed or worn; often repairable
Tank body or baseTank has failed; replace it

Replacing it in Columbus

The city's 2026 typical projects list puts "Replace a hot water tank" under permits without plan review. Your plumber pulls it, since owners can only get plumbing permits for work they do themselves in their own single-family home (BZS FAQ). Fixr's national average range for an installed gas tank is $1,000 to $2,700. Columbia Gas of Ohio's regular rebates have ended, so don't expect one; see rebates.

The plumber

Plumbing contractors working in Columbus need an Ohio OCILB license and city registration, and the city licenses journeyperson plumbers itself (contractor licenses). Check the company in the OCILB lookup.

What a repair usually costs

National ranges from cost publishers, not Columbus quotes. The fault decides the price, so ask for it in writing before work starts.

JobNational rangeSource
Water heater repair$150 to $750Fixr, updated Aug 2025

When you call: 4 questions to ask

  1. Will you pull the city permit for replacing the hot water tank?
  2. Is the leak on my side of the curb valve or the city's?
  3. Can I see your OCILB license and city registration?
  4. Does the service-call fee count toward the repair?

A fair written quote shows the heater or repair, labor, the permit, haul-away of the old tank and the written warranty. Check any contractor's license on the OCILB company licensee lookup before work starts.

What happens when you call

  1. You're connectedStraight to a local plumber that serves your area and takes calls like yours.
  2. You get a priceDescribe the problem, ask for a written quote and their license number. No obligation.

Want a price for your home? Call a local plumber for a written quote.

Phone line opening soon

Common questions

How urgent is a dripping water heater?

It can turn urgent. Close the cold supply and turn off the fuel right away. A small leak at a fitting can wait for a plumber; a leaking tank needs replacing soon.

Does the replacement tank need a city permit?

Yes. Columbus lists "Replace a hot water tank" among jobs that require a permit, but not plan review.

What should I budget for a replacement?

Fixr gives $1,000 to $2,700 as its national average range for a gas tank, installed. No Columbus figure is published.

Related guides

Sources

  1. Columbia Gas of Ohio: Sewer line safety (gas leak steps and emergency number)
  2. City of Columbus Building and Zoning Services: Typical residential projects (2026)
  3. City of Columbus Department of Building and Zoning Services: Frequently asked questions
  4. Fixr: Gas water heater installation cost
  5. Columbia Gas of Ohio: Energy efficiency for your home
  6. City of Columbus: Contractor licenses
  7. Ohio Department of Commerce: OCILB company licensee lookup

Costs are typical ranges. Your quote depends on your home. Rules and rebates change; check the original source before you rely on a figure. Something wrong? Tell us via the contact on the Impressum page.