Fixr puts an installed gas furnace at $3,800 to $10,000 nationally; we have no Denver-specific number, so treat that as a yardstick rather than a local price. Xcel Energy's 2026 rebate is $225 for a furnace rated 95% AFUE or better that replaces a non-condensing furnace, for equipment installed and invoiced through 2026. In Denver, forced air heating work for single-family and duplex homes is on the quick permit list.

Key facts
- Gas furnace, installed
- $3,800–$10,000 (national, Fixr)
- Xcel Energy furnace rebate
- $225: 95%+ AFUE, replacing a non-condensing furnace
- Rebate timing
- Equipment installed and invoiced through 2026
- Smart thermostat
- $50 (ENERGY STAR, eligible for AC Rewards)
- Cold climate heat pump instead
- $750 per heating ton standard; $1,500 with the bonus (Xcel Energy)
- Central AC on the same visit
- $5,000–$12,000 (national, Fixr)
- Permit
- Quick permit for forced air heating systems (Denver)
Why quotes differ
Fixr's national figure for an installed gas furnace runs from $3,800 to $10,000. Your own number depends on what the installer finds in the house:
- The AFUE rating. Xcel Energy only pays its 2026 furnace rebate for 95%+ AFUE equipment that replaces a non-condensing furnace, so the rating on the quote decides whether $225 comes back to you.
- Sizing. Ask the installer how they worked out the size for your house, and how the unit will be set up for an elevation of 5,280 feet.
- Venting, ducts and gas piping. Moving from an older furnace to a condensing model can change the venting, and any duct or gas line work adds labor.
- Cooling at the same time. Swapping the central AC in the same job raises the total; Fixr's national range for a central AC installation is $5,000 to $12,000.
2026 money toward the job
| Item | Amount |
|---|---|
| Gas furnace, 95%+ AFUE, replacing a non-condensing furnace (Xcel Energy) | $225 |
| Smart thermostat, ENERGY STAR, eligible for AC Rewards (Xcel Energy) | $50 |
| Cold climate air source heat pump, ducted, per heating ton at 5 °F, standard (Xcel Energy) | $750 |
| Same heat pump, per heating ton at 5 °F, with the bonus (Xcel Energy) | $1,500 |
| Colorado Heat Pump Tax Credit, air-source: credit / minimum customer discount | $1,000 / $333 |
The Xcel Energy amounts come from its 2026 Colorado Residential Rebate Summary. The furnace rebate applies to equipment installed and invoiced through 2026.
Want a price for your home? Call a local heating & cooling pro for a written quote.
Phone line opening soonLooking at a heat pump
A ducted cold climate air source heat pump is the other route. Xcel Energy pays per heating ton at 5 °F, $750 standard or $1,500 with the bonus, and the Colorado Heat Pump Tax Credit for an air-source unit installed on or after January 1, 2026 is $1,000. The installing contractor claims that credit and must pass at least $333 of it to you as a discount. Ask each installer which rebate level the quoted model reaches. See all 2026 rebates.
Permit and who signs off
Denver's quick permit list includes forced air heating systems for single-family and duplex homes, issued without plan review. A homeowner permit is possible in a home you legally own and live in, but mechanical and HVAC work requires passing an exam first (see permits). On the contractor side, Denver issues the "Heating, Ventilating, A/C – Residential Only" supervisor certificate, so ask which certificate holder is responsible for your job.
Ask for these in writing
- Brand, model number and AFUE rating of the furnace.
- Whether the Denver permit and inspection are included.
- Who submits the Xcel Energy rebate, and the invoice date.
- Haul-away of the old unit and the parts and labor warranty.
When you call: 4 questions to ask
- Which Denver mechanical supervisor certificate covers this job, and who pulls the quick permit?
- Is the new furnace 95% AFUE or better, so it qualifies for Xcel Energy's rebate?
- For a heat pump: will you claim the Colorado Heat Pump Tax Credit and show the discount on my invoice?
- Will you size it with a load calculation for our altitude and winters?
A fair written quote shows equipment model and efficiency, the permit, rebate and tax-credit paperwork, and parts and labor warranty. Check any contractor's license on the DORA license lookup before work starts.
What happens when you call
- You're connectedStraight to a local heating & cooling pro that serves your area and takes calls like yours.
- You get a priceDescribe the problem, ask for a written quote and their license number. No obligation.
Common questions
How much does a gas furnace cost to replace in Denver?
We don't have a Denver-specific figure. Fixr's national figure is $3,800 to $10,000 installed. The efficiency rating, sizing and any venting or duct work decide where your quote lands.
What does Xcel Energy pay toward a new furnace in 2026?
$225 for a gas furnace rated 95% AFUE or higher that replaces a non-condensing furnace, for equipment installed and invoiced through 2026.
Does a furnace swap need a permit in Denver?
Denver lists forced air heating systems for single-family and duplex homes among the work that can be issued as a quick permit, with no plan review. The contractor usually takes care of it.
Can I get the state heat pump credit myself?
The Colorado Heat Pump Tax Credit is claimed by the installing contractor. For an air-source heat pump the credit is $1,000, and you receive a discount of at least $333.
Related guides
Sources
- Fixr: Natural gas furnace cost (national)
- Fixr: Central air conditioner installation cost (national)
- Xcel Energy: 2026 Colorado Residential Rebate Summary
- Colorado Energy Office: Colorado Heat Pump Tax Credit
- Denver Community Planning and Development: Quick permits
- Denver Community Planning and Development: Homeowner permits
- Denver Contractor Licensing: Mechanical supervisor certificates
- State of Colorado: Colorado State Capitol
Costs are typical ranges. Your quote depends on your home. Rules and rebates change; check the original source before you rely on a figure. Something wrong? Tell us via the contact on the Impressum page.