South Carolina's registration line for residential specialty contractors is $500, and vinyl and aluminum siding installers are one of the listed classes, so look the company up before you sign. On price, Fixr's national range is $8,500 to $20,000 for a full replacement, with a $14,500 average on a 2,000 sq.ft. house.

Key facts
- Full replacement (Fixr, national)
- $8,500–$20,000
- Average for 2,000 sq.ft.
- $14,500
- Old siding removal
- $1,000–$2,500
- Repairing 100 sq.ft.
- $1,280–$2,380
- SC specialty registration
- Undertakings over $500
Low and high per square foot
Fixr's national table (January 23, 2026), with the low and high ends side by side:
| Material | Low | High |
|---|---|---|
| Stucco | $7 | $17 |
| Wood | $2 | $15 |
| Fiber cement | $5 | $14 |
| Vinyl | $3 | $12 |
| Aluminum | $3 | $10 |
| Engineered wood | $2 | $10 |
Beyond the panels
Pulling off and hauling away the old siding is $1,000 to $2,500 on Fixr's national figures, depending on its weight and condition. Where a permit applies, Fixr says fees typically range from $150 to $1,500 depending on local regulations; siding is not on Greenville's no-permit list, so ask the Building Codes and Permit Center at 864-467-4505.
Want a price for your home? Call a local siding contractor for a written quote.
Phone line opening soonA repair instead
For damage on one section, Fixr's national repair range is $1,280 to $2,380 for 100 sq.ft., with a $1,830 average. Minimum charges typically run $244 to $454.
The dollar lines in SC law
Above $500, a residential specialty contractor must register with the Residential Builders Commission; vinyl and aluminum siding installers are one such class. Above $5,000, the residential builder definition in S.C. Code 40-59-20(6) applies. Use the siding hub for the lookup link.
When you call: 4 questions to ask
- Are you registered with the SC Residential Builders Commission as a vinyl and aluminum siding installer?
- Does the City of Greenville require a permit for this job, and who pulls it?
- Does the price include tearing off and hauling away the old siding?
- If my house was built before 1978, is your firm EPA lead-safe certified?
A fair written quote shows the siding material, the square footage, tear-off and disposal, any permit, and the registration number. Check any contractor's license on SC LLR Residential Builders Commission licensee lookup before work starts.
What happens when you call
- You're connectedStraight to a local siding contractor that serves your area and takes calls like yours.
- You get a priceDescribe the problem, ask for a written quote and their license number. No obligation.
Common questions
How much does it cost to replace siding in Greenville, SC?
We only have national numbers: Fixr says $8,500 to $20,000, about $14,500 for a 2,000 sq.ft. home.
Which siding has the highest top price per square foot?
Of the six materials in our table, stucco tops out highest at $17; Fixr's full table goes higher for brick (up to $21) and stone (up to $45).
Is a siding repair cheaper?
Fixr's national range for 100 sq.ft. is $1,280 to $2,380, with minimum charges of $244 to $454.
Does a small siding job need a registered contractor?
South Carolina requires residential specialty contractors to register when undertakings exceed $500. Vinyl and aluminum siding installers are a listed class.
Related guides
Sources
- Fixr: Siding replacement cost (national)
- Fixr: Siding repair cost (national)
- SC LLR Residential Builders Commission: Residential specialty contractor registration package
- South Carolina Code Title 40, Chapter 59: Residential builders
Costs are typical ranges. Your quote depends on your home. Rules and rebates change; check the original source before you rely on a figure. Something wrong? Tell us via the contact on the Impressum page.