Local Repair FinderMinneapolis home repair guide

No hot water in Minneapolis

Minneapolis & the Twin Cities · Reviewed November 2026 · Checked against 8 public sources

Leak, burst pipe or no hot water?

Talk to a local plumber now. Free, no obligation.

Phone line opening soon
  • Free to call
  • No obligation
  • Local Minneapolis companies
  • Ask for a written quote

Have this ready when you call

  • Your address
  • Where the water is and whether the main is off
  • When it started

First work out which kind of heater you have. Electric: check the breaker and reset it once. Gas: look for a gas smell first; if there is one, leave and call CenterPoint Energy and 911. In a Minneapolis winter, with a normal January low of 8.8 °F, a frozen supply line can also stop hot water. Gas-fired work is for a licensed pro.

A hand turning the control dial on a gas water heater

Key facts

Electric heater
Breaker, one reset
Gas heater
Gas smell? Leave; CenterPoint 800-296-9815 or 612-372-5050, and 911
Only some taps cold
Frozen line or a fixture problem
January normal low
8.8 °F (Minneapolis-St. Paul airport, 1991–2020)
Permit to replace
City of Minneapolis plumbing permit
Tankless rebate
$500 from CenterPoint, replacement, 0.87 UEF or greater (2026)

Start with one question: where is it cold?

  • Every hot tap is cold. The heater itself, its power or gas, or its controls.
  • One fixture is cold. That fixture's valve or a frozen pipe on its run, often on an outside wall.
  • Hot water runs out fast. A worn element, sediment or an undersized tank.
  • No water at all. A frozen or broken supply; see frozen pipes.

Checks by heater type

CheckElectric heaterGas heater
PowerBreaker tripped? Reset once. If it trips again, stop.Power vented models plug in: check the outlet and breaker.
FuelNot applicableOther gas appliances working? If none are, call CenterPoint Energy.
ControlsLeave the element covers closedLook at the status light; don't open the burner area
VentingNot applicableOutdoor vent pipe clear of snow and frost
LeaksWater at the base means replacement is likelySame, plus any gas smell means leave first

Want a price for your home? Call a local plumber for a written quote.

Phone line opening soon

The gas rule in Minneapolis

Owner-occupants in Minneapolis can do their own plumbing or mechanical work, but the City's permit applicants page says homeowners are not allowed to work on gas-fired heating equipment. Treat the gas controls and burner of a water heater as off limits unless the City tells you otherwise. CenterPoint Energy's gas leak advice is simple: leave on foot, then call CenterPoint at 800-296-9815 or 612-372-5050 and 911 from a safe spot.

When it is time for a new heater

The City lists replacing or installing a water heater as work that needs a plumbing permit, and the plumber must be licensed or registered with the Minnesota Department of Labor and Industry. Fixr's national average range for a tank-style gas heater is $1,000 to $2,700 installed. CenterPoint Energy pays $500 in 2026 for a replacement tankless gas unit at 0.87 UEF or greater.

Cold-weather causes

With a normal January low of 8.8 °F at the airport (NOAA, 1991–2020), the hot line to a bathroom over a garage or on an outside wall can freeze even when the heater is fine. If the cold tap at that fixture also stops, it is likely a frozen pipe rather than the heater.

What a repair usually costs

National ranges from cost publishers, not Minneapolis quotes. The fault decides the price, so ask for it in writing before work starts.

JobNational rangeSource
Water heater repair$150 to $750Fixr, updated Aug 2025

When you call: 4 questions to ask

  1. Who pulls the City plumbing permit for the water heater?
  2. Is this tankless unit 0.87 UEF or greater for CenterPoint's rebate?
  3. Are you licensed or registered with the Minnesota Department of Labor and Industry?
  4. If the problem is under the street, can you show me on camera where it is?

A fair written quote shows the equipment, labor, the permit, haul-away of the old unit and written warranty terms. Check any contractor's license on the Minnesota DLI license lookup before work starts.

What happens when you call

  1. You're connectedStraight to a local plumber that serves your area and takes calls like yours.
  2. You get a priceDescribe the problem, ask for a written quote and their license number. No obligation.

Common questions

Why do I have no hot water but cold water works?

Usually the heater has lost power or gas, a safety control has shut it down, or the heater has failed. If only one fixture is cold, suspect a frozen or blocked line to it.

Can I relight my gas water heater in Minneapolis?

Follow the lighting instructions on the heater's label. If the pilot won't stay lit, call a licensed plumber. If you smell gas, leave first, then call CenterPoint Energy and 911.

What does a new water heater cost?

Fixr's national average range for a tank-style gas water heater is $1,000 to $2,700 installed.

Is a permit needed to replace it?

Yes. The City of Minneapolis requires a plumbing permit to replace or install a water heater.

Related guides

Sources

  1. Minnesota DNR State Climatology Office: NOAA NCEI Local Climatological Data, Minneapolis-St. Paul International Airport, 2022 (1991–2020 normals)
  2. City of Minneapolis: Permit applicants
  3. CenterPoint Energy: What to do if you smell gas
  4. CenterPoint Energy (Minnesota): Stay safe
  5. City of Minneapolis: Plumbing permits
  6. Minnesota Department of Labor and Industry: Choosing a plumber
  7. Fixr: Gas water heater installation cost
  8. CenterPoint Energy (Minnesota): Water heater rebates, 2026

Costs are typical ranges. Your quote depends on your home. Rules and rebates change; check the original source before you rely on a figure. Something wrong? Tell us via the contact on the Impressum page.