Fixr puts the average installed cost of a natural gas furnace at $3,800 to $10,000. That's a national figure; this guide's sources have no Raleigh-only price. Plan on a City of Raleigh permit, since HVAC replacement is on the City's permit-but-no-plans list. Enbridge Gas North Carolina posts furnace rebates, but its page shows no program year, so open the current page before you rely on one.

Key facts
- Gas furnace, installed
- $3,800–$10,000 (average installed cost, Fixr, national)
- Permit
- Required for HVAC replacement; no plans (City of Raleigh)
- Brand-new installation
- Plot plan required
- Gas utility
- Enbridge Gas North Carolina
- Furnace rebate
- Enbridge Gas North Carolina runs one: check its current page
- Contractor license
- North Carolina State Board of Examiners of Plumbing, Heating and Fire Sprinkler Contractors
Three paths, and what each means here
1. Repair what you have
If a technician can fix the existing furnace, you skip the big bill. This guide has no Raleigh rule on whether a small repair needs a permit. If a part of the system is being replaced, ask the contractor whether they'll apply, and check with City of Raleigh Planning and Development if you're unsure.
2. Swap in another gas furnace
Raleigh's residential permit page puts HVAC replacement under its replacements heading, among projects that require a permit but do not require plans. Fixr's average installed cost for a natural gas furnace is $3,800 to $10,000 nationally. Enbridge Gas North Carolina's residential rebates page lists furnace rebates tied to efficiency. The page prints no program year, so read it fresh, along with its conditions, before you choose a model.
3. Move to a heat pump
Duke Energy runs an HVAC replacement rebate page that covers heat pumps; check it for current amounts and requirements. Separately, Energy Saver North Carolina lists rebates of up to $8,000 for a space heating and cooling heat pump for income-qualified households. See the rebates page for the income bands.
Want a price for your home? Call a local heating & cooling pro for a written quote.
Phone line opening soonReading the quote
| Line on the quote | What to look for |
|---|---|
| Equipment | Make, model and efficiency rating, so you can match it to any rebate's terms |
| Permit | Who applies to the City and whether the fee is included |
| Plot plan | Needed if this is new equipment rather than a replacement |
| Old unit | Removal and disposal included or extra |
| Rebate | Which program, and who files the paperwork |
| License | The contractor's number with the state plumbing, heating and fire sprinkler board |
Your house, its ductwork and the unit you choose decide where a quote lands within or outside the national range. Two quotes on the same equipment make the comparison fair.
Just outside the city limits?
The City of Raleigh issues permits inside the city. Wake County Permits and Inspections handles building permits and inspections for all unincorporated areas of Wake County, and the Town of Cary has its own Cary Inspections and Permits Department. Ask the office that covers your address.
When you call: 4 questions to ask
- Is the City of Raleigh permit for this HVAC replacement in your price, and who applies for it?
- What's your license number with the North Carolina State Board of Examiners of Plumbing, Heating and Fire Sprinkler Contractors?
- Which rebate does this quote assume, and did you check that program's current page?
- If this is new equipment rather than a replacement, will you prepare the plot plan the City asks for?
A fair written quote shows the equipment and its efficiency rating, the City permit, any rebate paperwork, removal of the old unit and the warranty. Check any contractor's license on the state plumbing, heating and fire sprinkler board's license search before work starts.
What happens when you call
- You're connectedStraight to a local heating & cooling pro that serves your area and takes calls like yours.
- You get a priceDescribe the problem, ask for a written quote and their license number. No obligation.
Common questions
How much is a new gas furnace in Raleigh?
There's no Raleigh-only figure in this guide's sources. Fixr's national average installed cost for a natural gas furnace is $3,800 to $10,000.
Does a furnace replacement need a permit in Raleigh?
Yes, by the City's list: HVAC replacement is among projects that require a permit but do not require plans. Brand-new equipment needs a plot plan.
Does Enbridge Gas North Carolina give a rebate on a new furnace?
Its residential rebates page lists furnace rebates, but the page shows no program year, so this guide doesn't quote amounts. Check the current page and its conditions before you buy.
I live in unincorporated Wake County. Who issues my permit?
Wake County Permits and Inspections provides building permitting and inspection services for all unincorporated areas of the county.
Related guides
Sources
- Fixr: Furnace cost guide
- City of Raleigh Planning and Development: How to get a residential permit (updated July 13, 2026)
- Enbridge Gas North Carolina: Contact us
- Enbridge Gas North Carolina: Residential rebates
- Duke Energy: HVAC replacement rebates
- NC DEQ: Energy Saver North Carolina available in all 100 counties (February 10, 2026)
- Wake County: Permits and Inspections
- Town of Cary: Residential permits
- State Board of Examiners of Plumbing, Heating and Fire Sprinkler Contractors: Consumer awareness
- Johnston County Inspections: licensing boards and contractor searches
Costs are typical ranges. Your quote depends on your home. Rules and rebates change; check the original source before you rely on a figure. Something wrong? Tell us via the contact on the Impressum page.