Fixr's national figure for a tank-style gas water heater is $1,000 to $2,700. On permits, there are two written answers: the City of Raleigh lists water heater replacement as needing a permit, while G.S. 160D-1110(a) drops the permit for certain replacements by a licensed person when every condition is met. Both are quoted below. Confirm with the City before the old tank comes out.

Key facts
- Tank-style gas water heater
- $1,000–$2,700 (national, Fixr)
- City of Raleigh
- Water heater replacement: permit required, plans not required
- G.S. 160D-1110(a)
- No permit for a qualifying replacement in a one- or two-family dwelling, only if all conditions are met
- Heat pump water heater, state program
- Up to $1,750 for a heat pump water heater for income-qualified households (Energy Saver North Carolina)
- Utility rebates
- Duke Energy (heat pump models) and Enbridge Gas North Carolina (gas models): check current pages
- Plumbing license
- North Carolina State Board of Examiners of Plumbing, Heating and Fire Sprinkler Contractors
The permit, in each source's words
City of Raleigh. Its How to Get a Residential Permit page, updated July 13, 2026, lists "water heater replacement" under Replacements (replacing existing with new), among projects that "require a permit but do not require plans." The page says its list is not inclusive of all project work types. It doesn't mention G.S. 160D-1110 or its permit exemption.
G.S. 160D-1110(a). The statute reads: "except that in any one- or two-family dwelling unit a permit is not required for the connection of a water heater that is being replaced if (i) the work is performed by a person licensed under G.S. 87-21 who personally examines the work at completion and ensures that a leak test has been performed on the gas piping and (ii) the energy use rate or thermal input is not greater than that of the water heater that is being replaced, there is no change in fuel, energy source, location, capacity, or routing or sizing of venting and piping, and the replacement is installed in accordance with the current edition of the North Carolina State Building Code."
So what do you do? This guide can't tell you which one an inspector will apply to your house. Call City of Raleigh Planning and Development before the job and ask whether your replacement needs a permit. If a plumber tells you it doesn't, ask which rule they're relying on and have them put it in writing.
Price
| Item | Figure | Source |
|---|---|---|
| Tank-style gas water heater | $1,000–$2,700 | Fixr, national |
No Raleigh-only price appears in this guide's sources. Venting, access and whether anything about the setup changes all affect a quote.
Want a price for your home? Call a local plumber for a written quote.
Phone line opening soonThinking about a heat pump water heater?
The statute's exemption covers only a swap with no change in fuel or energy source, so moving from a gas tank to a heat pump model sits outside it. Energy Saver North Carolina lists up to $1,750 for a heat pump water heater for income-qualified households. Duke Energy has a heat pump water heater rebate page; it shows no program year, so check its current amount and conditions. For gas models, Enbridge Gas North Carolina's rebates page is the place to look, again with no program year printed.
Before you sign
- Is the plumber licensed with the North Carolina State Board of Examiners of Plumbing, Heating and Fire Sprinkler Contractors? Check on the public search.
- Will they apply for the City permit, or are they relying on the state exemption?
- For gas: will they leak test the gas piping?
- Does the price include hauling away the old tank?
- Which rebate, if any, does the quote assume?
When you call: 4 questions to ask
- The City lists water heater replacement as needing a permit: will you apply, or are you relying on the G.S. 160D-1110(a) exemption, and why?
- Is this leak on my side of the property line or the City's?
- For a gas heater, will you leak test the gas piping when you're done?
- Is the service-call fee credited if I go ahead?
A fair written quote shows the heater or parts, labor, any permit, haul-away of the old tank and the written warranty. Check any contractor's license on the state plumbing, heating and fire sprinkler board's license search before work starts.
What happens when you call
- You're connectedStraight to a local plumber that serves your area and takes calls like yours.
- You get a priceDescribe the problem, ask for a written quote and their license number. No obligation.
Common questions
What does a new water heater cost in Raleigh?
This guide has no Raleigh-only figure. Fixr's national figure for a tank-style gas water heater is $1,000 to $2,700.
Do I need a permit to replace a water heater in Raleigh?
The City lists water heater replacement among projects that require a permit but do not require plans. G.S. 160D-1110(a) says a permit is not required in a one- or two-family dwelling only when a licensed person does the work and every listed condition is met. Confirm with City of Raleigh Planning and Development.
Is there a rebate for a heat pump water heater?
Energy Saver North Carolina lists up to $1,750 for a heat pump water heater for income-qualified households. Duke Energy also has a heat pump water heater rebate page; check it for the current amount.
Related guides
Sources
- Fixr: Gas water heater cost
- City of Raleigh Planning and Development: How to get a residential permit (updated July 13, 2026)
- North Carolina General Statutes: G.S. 160D-1110
- NC DEQ: Energy Saver North Carolina available in all 100 counties (February 10, 2026)
- Duke Energy: Heat pump water heater rebates
- Enbridge Gas North Carolina: Residential rebates
- State Board of Examiners of Plumbing, Heating and Fire Sprinkler Contractors: Consumer awareness
- Johnston County Inspections: licensing boards and contractor searches
Costs are typical ranges. Your quote depends on your home. Rules and rebates change; check the original source before you rely on a figure. Something wrong? Tell us via the contact on the Impressum page.