Austin Water's own check: write down a meter reading, use no water for a few hours, then read it again. Everything past the meter, including pipes under the house, is the owner's responsibility, so a suspected slab leak is a call to a licensed plumber for a leak detection test. Once it's repaired, you have 90 days to ask Austin Water for a leak bill adjustment. Fixr's national range for slab leak repair is $1,000 to $4,000.
Key facts
- Austin Water's meter check
- Read, use no water for a few hours, read again
- Past the meter
- Owner's line and plumbing
- Utility-side leak
- Austin Water, 512-972-1000, option 1
- Leak bill adjustment
- Request within 90 days of the leak repair
- Slab leak detection test
- $100–$400 (national, Fixr)
- Slab leak repair
- $1,000–$4,000, national average $2,500 (Fixr)
- Plumber license
- Texas State Board of Plumbing Examiners
Austin Water's leak checks
A leak under a slab is out of sight, so the meter is your first witness. Austin Water suggests starting with your meter and your bill, looking for signs of unusual use. To check the meter directly, it says to write down a reading and check it again a few hours later without using any water in between. Its My ATX Water portal can also send continuous usage alerts that could point to a leak.
EPA's WaterSense program adds some general household leak checks. They are not slab-leak signs; they tell you whether water is going somewhere, not where:
- Check the meter before and after a two-hour period when no water is being used. If it changes at all, EPA says you probably have a leak.
- Put a few drops of food coloring in the toilet tank. Color in the bowl after 10 minutes means the toilet is leaking, which is worth ruling out first.
- Look at your use in a colder month such as January or February. EPA says a family of four going over 12,000 gallons a month could have serious leaks.
Whose pipe is it?
Austin Water draws the line at the meter. Its leak page says property owners are responsible for service lines past the meter and for internal plumbing issues, and that you maintain the service line and cut-off valve on the private side. Pipes running under your slab fall on your side. If water is coming up on the utility side of the meter, report it to Austin Water at 512-972-1000, option 1.
What to do next
- Rule out the easy ones. Dye-test each toilet and look under sinks and around the water heater for drips you can see.
- Run the meter check twice. Once overnight if you can. Write both readings down with the times; the plumber will want them.
- Book a leak detection test. Fixr says that if you suspect a slab leak, you call for a slab leak detection test. Check the plumber on the TSBPE Public License Search first.
- Keep every receipt. The repair invoice is what unlocks the bill credit below.
- Tell your insurer once the leak is confirmed. Ask how the policy treats it before work starts.
Want a price for your home? Call a local plumber for a written quote.
Phone line opening soonWhat the City's permit pages say
Austin's list of work exempt from building permits includes "repairing of leaks in pipes, valves, or fixtures if the work does not involve or require the replacement or rearrangement of valves, pipes, or fixtures." A repair that replaces or reroutes pipe is outside that exemption, and the City's own rule of thumb is "If it's not on the list, likely a permit is required." The list doesn't mention slab leaks or water service lines by name, and exempt work still has to meet building codes.
The same list covers "A foundation repair that does not exceed 128 square feet." Permit questions go to Development Services at the Permitting and Development Center, 6310 Wilhelmina Delco Drive.
Getting money back on the water bill
Austin Water offers a water leak bill adjustment under City Code 15-9-141. Send it within 90 days of the leak repair to customercare@coautilities.com, including:
- the leak repair receipt or paid invoice describing the repair
- your Austin Water account number
- the address where the repair took place
- the date range of high-bill charges caused by the leak
- the date and description of the repair
If you receive the adjustment, you can't request an administrative hearing for the same billing period.
Insurance: sudden or gradual
The Texas Department of Insurance says most homeowner and renters policies cover sudden and accidental water damage, but policies usually won't cover damage from gradual leaks. Its homeowners guide lists a continuous water leak among the things most policies don't cover. Hidden water damage usually has to be reported within days after you first see it, so call once the test confirms a leak. TDI's Help Line is 800-252-3439, Monday to Friday.
National costs
| Stage | National figure (Fixr) |
|---|---|
| Slab leak detection test | $100 to $400, depending on how invasive the detection needs to be |
| Slab leak repair | $1,000 to $4,000, national average $2,500 |
No Austin-specific figure is available here, and any flooring or drying work is extra.
When you call: 4 questions to ask
- Would a heat pump water heater qualify for the Austin Energy rebate here?
- Does this replacement need a City permit, and who pulls it?
- Which Texas State Board of Plumbing Examiners license do you hold?
- Is the diagnostic fee credited toward the repair?
A fair written quote shows the heater model, labor, any permit, removal of the old unit and written warranty terms. Check any contractor's license on the TDLR license search before work starts.
What happens when you call
- You're connectedStraight to a local plumber that serves your area and takes calls like yours.
- You get a priceDescribe the problem, ask for a written quote and their license number. No obligation.
Common questions
How can I tell if I have a slab leak in Austin?
The checks available are general: Austin Water's meter test (read the meter, use no water for a few hours, read it again) and the My ATX Water usage alerts. A moving meter tells you water is going somewhere. A plumber's slab leak detection test is what finds out where.
Who pays to fix a slab leak in Austin?
The owner. Austin Water says property owners are responsible for service lines past the meter and for internal plumbing issues. Whether insurance helps depends on your policy; TDI says gradual leaks are usually not covered.
Can I get a credit on my Austin water bill after a leak?
Yes, Austin Water has a leak bill adjustment under City Code 15-9-141. Request it within 90 days of the repair by email to customercare@coautilities.com, with the paid invoice, account number, address, the high-bill date range and the repair date and description.
Do I need a permit to repair a slab leak in Austin?
The City's exempt list covers repairing leaks in pipes if the work doesn't involve replacing or rearranging pipes, valves or fixtures. It doesn't name slab leaks. For anything beyond that, the City says that if it's not on the list, likely a permit is required; your plumber can confirm.
Related guides
Sources
- Austin Water: Water leaks
- Austin Water: Contact
- Austin Water: High water bill options
- EPA WaterSense: Fix a Leak Week
- City of Austin Development Services: Work exempt from building permits
- City of Austin Development Services: Permit Like a Pro (Sept. 2025 presentation)
- City of Austin: Permitting and Development Center
- Texas Department of Insurance: When are water damage and mold covered by insurance?
- Texas Department of Insurance: Homeowners insurance guide
- Texas Department of Insurance: Storm recovery tips and Help Line
- Texas State Board of Plumbing Examiners
- Fixr: Slab leak repair cost (national)
Costs are typical ranges. Your quote depends on your home. Rules and rebates change; check the original source before you rely on a figure. Something wrong? Tell us via the contact on the Impressum page.