Local Repair FinderAustin home repair guide

Water heater leaking in Austin

Austin & Travis County · Reviewed November 2026 · Checked against 11 public sources

Close the cold-water valve on the pipe feeding the heater, and switch off its breaker if the unit is electric. Then look for where the water starts: a fitting on top, the relief pipe down the side, or the tank base. Water from the tank body means replacement. If no valve will stop it and the leak is on the utility side of the meter, call Austin Water at 512-972-1000, option 1.

Key facts

First move
Close the cold supply valve above the heater
Electric unit
Switch its breaker off
Gas unit
Leave gas controls alone; gas odor means leave, then call 911 and Texas Gas Service at 800-959-5325
Utility-side leak
Austin Water, 512-972-1000, option 1
New tank-style gas heater
$1,000–$2,700 installed (national, Fixr)
Rebate
$1,000 from Austin Energy on a heat pump water heater
Texas license
Plumbers: State Board of Plumbing Examiners

Safe to wait or not?

Can waitA few drops at a pipe joint on top of the tank, with the floor otherwise dry. Put a pan under it and book a plumber for the coming days.
Can't waitWater pooling at the base, a steady stream from the relief pipe, water reaching flooring or a wall, or any gas smell. Shut the supply and call today; for gas, leave first.

Six checks, in order

  1. Close the cold supply. Follow the pipe entering the top of the heater to its valve. A lever handle turns a quarter turn until it sits across the pipe, and a round handle turns clockwise until it stops.
  2. Take away the heat source. On an electric or heat pump model, switch off the breaker labelled Water Heater. On a gas model, keep your hands off the gas control and the pilot; if there is a gas odor, leave the area immediately and call 911 and Texas Gas Service at 800-959-5325.
  3. Water still appearing with the supply valve shut? Call a local plumber now, then continue with the list.

    Phone line opening soon

    Have this ready when you call

    • Your address
    • Where the water is and whether the main is off
    • When it started
  4. Valve won't hold? Go to the main. Use the house shutoff or the customer-side valve at the meter. Austin Water says that valve and the line past the meter are yours to maintain; for a leak on the utility side, its emergency line is 512-972-1000, option 1.
  5. Trace the water upward. Dry the tank with a towel and watch. Moisture starting at the top connections is a fitting, a trickle from the pipe running down the side is the relief valve, and seepage under the jacket is the tank itself.
  6. Save the floor. Mop, set a fan going, and shift boxes, rugs and anything cardboard out of the wet area. Keep away from outlets or cords sitting in water.
  7. Photograph it. Take the leak, the rating label on the tank and any damaged belongings. Your plumber and your insurer will both ask.
Water pooling in a drain pan around the base of a water heater

When the checks don't fix it

These findings mean a plumber, not another attempt:

  • Water is escaping from the tank body or the bottom seam.
  • The relief pipe keeps discharging after the tank has cooled.
  • You cannot find or turn a working shutoff valve.
  • Rusty water, popping noises or scorch marks came before the leak.
  • Flooring, drywall or a room below is already wet.

Draining the tank, capping the relief pipe or tightening a gas connection can each make things worse. Leave them for the plumber.

Does a new heater need a City permit?

City of Austin pages don't mention water heaters by name. The City's own rule of thumb is "If it's not on the list, likely a permit is required," and its list of exempt work covers leak repairs and fixture swaps but says nothing about water heaters. A residential Plumbing Change Out permit appears on the City's permit types page and is the likely fit; ask the plumber to confirm. The City's residential list of work exempt from permits includes no gas work, and the City says work not on that list likely needs a permit.

License, national cost and one rebate

Plumbers in Texas are licensed by the Texas State Board of Plumbing Examiners. Look up the name on the TSBPE Public License Search before agreeing to work.

This guide carries no verified Austin price for a water heater repair. Fixr's national range for a tank-style gas heater is $1,000 to $2,700 installed, and the water heater cost page has more.

Austin Energy offers a $1,000 rebate on a qualifying ENERGY STAR certified heat pump water heater. The home must have Austin Energy electric service and gas models do not qualify. Texas Gas Service's rebate program has expired, so there is nothing from the gas side.

Will insurance help?

The Texas Department of Insurance says most home policies cover a sudden and accidental release of water but not a continuous leak. A tank that lets go overnight and one that has wept for months may be treated differently. If water reached walls or flooring, start the water damage first steps and call your insurer.

What a repair usually costs

National ranges from cost publishers, not Austin quotes. The fault decides the price, so ask for it in writing before work starts.

JobNational rangeSource
Water heater repair$150 to $750Fixr, updated Aug 2025

When you call: 4 questions to ask

  1. Would a heat pump water heater qualify for the Austin Energy rebate here?
  2. Does this replacement need a City permit, and who pulls it?
  3. Which Texas State Board of Plumbing Examiners license do you hold?
  4. Is the diagnostic fee credited toward the repair?

A fair written quote shows the heater model, labor, any permit, removal of the old unit and written warranty terms. Check any contractor's license on the TDLR license search before work starts.

What happens when you call

  1. You're connectedStraight to a local plumber that serves your area and takes calls like yours.
  2. You get a priceDescribe the problem, ask for a written quote and their license number. No obligation.

Want a price for your home? Call a local plumber for a written quote.

Phone line opening soon

Common questions

Is a leaking water heater an emergency?

A drip at a top fitting can wait a few days with a pan under it. Water from the bottom of the tank, a running relief pipe or water spreading across the floor should be dealt with the same day.

Can a leaking water heater be repaired, or must it be replaced?

Leaks at the inlet and outlet connections, the drain valve or the relief valve are often repairable. Once the steel tank itself leaks, replacement is the fix.

Do I need a permit to replace a water heater in Austin?

The City doesn't name water heaters on its pages. Its guidance is that work not on the exempt list likely needs a permit, and a residential Plumbing Change Out permit exists. Have your plumber confirm with Development Services.

Does Austin Energy have a water heater rebate?

Yes: $1,000 on a qualifying ENERGY STAR certified heat pump water heater, for homes with Austin Energy electric service. Gas water heaters aren't eligible.

Related guides

Sources

  1. Austin Water: Contact
  2. Austin Water: Water leaks
  3. Texas Gas Service: Safety
  4. Texas Gas Service: Energy Efficiency Program
  5. City of Austin Development Services: Permit Like a Pro (Sept. 2025 presentation)
  6. City of Austin Development Services: Work exempt from building permits
  7. City of Austin Development Services: Types of permits
  8. Texas State Board of Plumbing Examiners
  9. Fixr: Gas water heater cost (national)
  10. Austin Energy: Heat pump water heater rebate
  11. Texas Department of Insurance: Homeowners insurance guide

Costs are typical ranges. Your quote depends on your home. Rules and rebates change; check the original source before you rely on a figure. Something wrong? Tell us via the contact on the Impressum page.