After the old shingles come off, the roofer says some of the wood decking underneath is rotten or damaged and charges per sheet. Roof decking replacement costs about $2–$5 per square foot installed (HomeGuide), which works out to roughly $64–$160 per 4×8 sheet. The count and the per-sheet price are what to watch.
Key facts
- Benchmark price
- $64–$160 per 4×8 sheet (roughly, based on $2–$5 per sq ft installed)
- Get this first
- Get the per-sheet price written into the contract before tear-off, so it can't be set afterwards.
- Line item to watch
- Replacing all the decking
Decking is the one roof cost nobody can see until the old shingles are off, which is why it is billed by the sheet.
Two numbers matter: the price per sheet, agreed before tear-off, and the number of sheets, backed by a photo of each one before it's covered.
From square feet to sheets
Roof decking replacement costs about $2–$5 per square foot installed (HomeGuide), which works out to roughly $64–$160 per 4×8 sheet. The per-sheet price should be in your contract before work starts.
Check one sheet's price
Typical range: $64–$160 per 4×8 sheet (roughly, based on $2–$5 per sq ft installed).
Counting the sheets
- Get the per-sheet price written into the contract before tear-off, so it can't be set afterwards.
- Ask for a photo of each bad sheet and a count before they're covered up.
- If insurance is paying, decking is often added as a supplement with photos. Ask to see them.
How the sheet count grows
| Charge | Has a reason when | Needs a photo when |
|---|---|---|
| Replacing all the decking | The house has old plank decking with gaps the shingle maker doesn't allow, or damage is widespread. | Photos show a few soft sheets near one vent or valley. |
| Thicker or premium sheets | The rafters are spaced wider than the current decking allows. | It's a default upgrade without a code or spacing reason. |
| Extra sheets 'just to be safe' | Never. Each sheet replaced should have a reason. | The count grows without photos. |
Settle these before tear-off
- What's your per-sheet price, in writing?
- Will you photograph every sheet you replace?
- Will you call me before going over a set number of sheets?
- No per-sheet price in the contract.
- A large sheet count with no photos.
Surprised by the sheet count? Another local roofer can look at the photos.
Phone line opening soonWhen you call: 4 questions to ask
- What's your PPRBD roofing license number, and can I see proof of insurance?
- Will the contract list scope, cost and start and finish dates, as Colorado law requires?
- Will you tear off all old layers, and what do you charge per sheet of rotten decking?
- Which shingle are you quoting, and is it Class 4?
A fair written quote shows a written contract with scope, cost and dates, your 72-hour right to cancel, and no offer to cover your deductible. Check any contractor's license on pprbd.org before work starts.
What happens when you call
- You're connectedStraight to a local roofer that serves your area and takes calls like yours.
- You get a priceDescribe the problem, ask for a written quote and their license number. No obligation.
Common questions
How much does it cost to replace roof decking per sheet?
Roughly $64–$160 per 4×8 sheet installed, based on $2–$5 per square foot. Get your roofer's per-sheet price in the contract.
How do I know the decking really needed replacing?
Ask for photos of each sheet and a count before the new roof covers them.
Related guides
Sources
- HomeGuide: Cost to replace roof decking
- C.R.S. 6-22-103: Contracts for roofing services: required terms
Costs are typical ranges. Your quote depends on your home. Rules and rebates change; check the original source before you rely on a figure. Something wrong? Tell us via the contact on the Impressum page.