Local Repair FinderDenver home repair guide

Breaker keeps tripping in Denver

Denver & the metro area · Reviewed November 2026 · Checked against 10 public sources

Breaker trouble, a burning smell or a panel upgrade?

Talk to a local electrician now. Free, no obligation.

Phone line opening soon
  • Free to call
  • No obligation
  • Local Denver-area companies
  • Ask for a written quote

Have this ready when you call

  • Your address
  • What lost power or keeps tripping
  • Anything warm, buzzing or smelling of burning

A breaker trips to protect the wiring, so the task is to learn why. Unplug everything on the circuit, reset the breaker once, and add devices back one at a time. If a single appliance trips it, that appliance is the problem. If it trips with nothing plugged in, or you notice heat, buzzing or a burning smell, leave it off and call an electrician licensed by Colorado's State Electrical Board.

An open electrical breaker panel in a garage

Key facts

Rule out first
Too many devices, one faulty appliance, a tripped GFCI outlet
Reset
Fully Off, then On, one time
Leave it off when
It trips with nothing plugged in, or there is heat, buzzing or a burning smell
License
Colorado State Electrical Board: Master, Journeyman, Residential Wireman, electrical contractor
License check
Colorado DORA license lookup
Panel permit in Denver
New or replacement panels: quick permit if the service is rated 400 Amps or less
200-amp service upgrade
$1,800–$4,500 (national, Fixr)

Rule out the simple things

  1. Work out which rooms and outlets went dead: knowing what the breaker feeds tells you what could be overloading it.
  2. Unplug every device on that circuit: a breaker cannot be judged fairly while the load that tripped it is still connected.
  3. Push the handle all the way to Off, then to On, once: a tripped breaker rests in the middle and will not reset from there.
  4. Plug things back in one by one: the device that trips the breaker by itself is the faulty one, and it should stay unplugged.
  5. Move the space heater, hair dryer or microwave to another circuit: heat-making appliances draw the most current, and two on one circuit is a classic overload.
  6. Press Reset on any outlet with Test and Reset buttons: a tripped GFCI outlet cuts power downstream and is easily mistaken for a breaker problem.
  7. Feel the breaker handle and the panel door with the back of your hand: warmth you can notice is a warning sign, and the cover behind the door stays on.
  8. Write down what was running each time it tripped: a pattern, such as every time the vacuum starts, shortens the electrician's visit.

Want a price for your home? Call a local electrician for a written quote.

Phone line opening soon

Signs it is not simple

  • The breaker trips at once with everything unplugged.
  • The breaker, an outlet or a switch plate is hot, discolored or smells of burning.
  • You hear buzzing or crackling at the panel.
  • Lights dim or flicker across the house when a large appliance starts.
  • The main breaker trips, or several breakers trip together.
  • The panel or an outlet has been wet.
  • A breaker will not stay reset or its handle feels loose.

Repeated resetting is how wiring gets damaged. A breaker that will not hold is doing its job, and what lies behind the panel cover is an electrician's territory. For smoke or flames, get out and call 911.

Who does what in Denver

A Colorado-licensed electrician diagnoses the circuit. The Colorado State Electrical Board, part of DORA's Division of Professions and Occupations, licenses Master and Journeyman electricians, Residential Wiremen and electrical contractors, and its site says electrical contracting in the state requires a licensed electrical contractor. Check the name on the DORA license lookup before the appointment.

Xcel Energy looks after the supply. If the entire house is dark and the main breaker has not tripped, the trouble may be outside your walls. Xcel Energy is Denver's electric utility, and the residential number in its outage release is 1-800-895-1999. Keep clear of any line that is down and call 911.

Denver permits panel work. The city's quick permits page says new or replacement panels and subpanels can be issued as a quick permit only if the utility service is rated 400 Amps or less. So when the fix is a new panel, a permit is part of the job; ask to see it on the estimate. This guide has no city statement on whether swapping a single breaker needs one, and Community Planning and Development can answer at 720-865-2700.

Owners doing their own electrical work. Denver's homeowner permit is for a home you legally own and live in, and electrical work requires passing an exam first, unless you hold a state electrical license. For a fault you cannot explain, hiring it out is the safer path.

What it may cost. This guide has no verified Denver price for tracing a fault or replacing a breaker. If the electrician recommends more capacity, Fixr's national figure for an upgrade to 200-amp service is $1,800 to $4,500, and Fixr notes the price depends on the current amperage and the age of the panel and wiring. The panel upgrade cost page has the detail.

Seasonal load. Denver's normal January low is 18.7 °F and its normal July high is 89.9 °F in National Weather Service summaries. Portable heaters in winter and window units in summer are the loads most likely to push an older circuit past its limit.

What a repair usually costs

National ranges from cost publishers, not Denver quotes. The fault decides the price, so ask for it in writing before work starts.

JobNational rangeSource
Replacing a circuit breaker$100 to $260HomeGuide

When you call: 4 questions to ask

  1. What's your Colorado electrical license number (I can check it on DORA)?
  2. Is my service 400 amps or less, so the panel can go through as a quick permit?
  3. Will the new panel leave room for a heat pump or car charger?
  4. Is there a trip fee, and is it credited if I go ahead?

A fair written quote shows the panel or parts, labor, permit and inspection, and any extra wiring repairs listed separately. Check any contractor's license on the DORA license lookup before work starts.

What happens when you call

  1. You're connectedStraight to a local electrician that serves your area and takes calls like yours.
  2. You get a priceDescribe the problem, ask for a written quote and their license number. No obligation.

Common questions

Why does my breaker keep tripping?

The three usual reasons are an overloaded circuit, a faulty appliance, or a wiring fault. Unplugging everything and adding devices back one at a time separates the first two from the third.

Is it dangerous if a breaker keeps tripping?

It can be. A trip from overload is the breaker working as intended, but a breaker that trips with nothing connected, or any heat, buzzing or burning smell, calls for an electrician and the breaker left off.

How many times can I reset a breaker?

Once, after unplugging the load. If it trips again, stop resetting and find the cause.

How do I check an electrician's license in Colorado?

Search the name on the Colorado DORA license lookup. The State Electrical Board licenses Master and Journeyman electricians, Residential Wiremen and electrical contractors.

Related guides

Sources

  1. Colorado State Electrical Board (DORA): Applications and forms
  2. Colorado DORA: License lookup
  3. Denver Community Planning and Development: Quick permits
  4. Denver Community Planning and Development: Homeowner permits
  5. Denver Community Planning and Development: Contact us
  6. Xcel Energy newsroom: outage preparation release, December 2025
  7. City and County of Denver: Denver-Xcel partnership
  8. Fixr: Electrical panel upgrade cost (national)
  9. National Weather Service Denver/Boulder: January 2026 monthly weather summary
  10. National Weather Service Denver/Boulder: July 2026 monthly climate summary

Costs are typical ranges. Your quote depends on your home. Rules and rebates change; check the original source before you rely on a figure. Something wrong? Tell us via the contact on the Impressum page.