A leak under the slab sits on the owner's side: Fort Worth Water owns the line up to and including the meter, and the property owner is responsible from the meter to the building inlet. Run general leak checks first, such as reading the meter across two hours with no water in use, then book a licensed plumber for a slab leak detection test, which Fixr puts at $100 to $400 nationally. Once it is fixed, a hidden leak beyond your control may qualify for a Fort Worth Water bill adjustment, if you apply within 60 days of the repair.
Key facts
- Fort Worth Water owns
- The main, the line to the meter, and the meter
- Owner is responsible for
- Meter to the building inlet
- Winter use flag
- Over 12,000 gallons (16 CCF) a month, family of four
- Bill adjustment
- Up to two billing periods, 50 percent of use above average
- Apply by
- 60 days after the completed leak repair
- Slab leak detection test
- $100–$400 (Fixr national)
- Slab leak repair
- $1,000–$4,000; $2,500 national average (Fixr)
- Plumber license
- Texas State Board of Plumbing Examiners
Whose pipe is under the floor
Fort Worth Water's service line inventory spells out the split. The utility owns the portion from the main to the water meter, and the meter. The property owner is responsible for the portion from the water meter to the building inlet. A leak below your foundation is on that private stretch or inside the house, so finding and fixing it is your plumber's work. If water is pooling at the meter box or a main has broken, that is the utility's to handle: 817-392-4477, option 1.
General leak checks
None of these is a slab-leak test. They tell you whether water is escaping somewhere; pinning it under concrete takes a plumber.
- Read the bills. Fort Worth Water's leak checklist says to compare this month's use with last month's and to look at a January or February bill. In the City's words, a typical family of four has a serious leak problem if winter water use (no irrigation system use) exceeds 12,000 gallons (or 16 CCF) per month.
- Rule out the toilets. The same checklist: a few drops of food coloring in the tank, wait 10 minutes. If color shows up in the bowl, you have a leak.
- Walk the house. The City lists the water heater, under sinks, faucets, appliance connections, walls, ceilings, floors, hose bibs and sprinklers.
- Watch the meter. EPA WaterSense: check your water meter before and after a two-hour period when no water is being used. If the meter changes at all, you probably have a leak. Fort Worth Water's checklist files a meter registering continuous usage under the heading that you have found a leak.
Toilets clear, nothing visible, meter still moving? Fixr's advice on its slab leak page is to call for a slab leak detection test.
Want a price for your home? Call a local plumber for a written quote.
Phone line opening soonFort Worth Water's leak adjustment
After the repair, ask for the credit. The rules on the City's leak adjustments page:
- A hidden leak beyond your control may qualify.
- Up to two consecutive billing periods affected by the leak may receive an adjustment equal to 50 percent of the difference above the average water use.
- Send Water Customer Service a copy of the repair receipt or paid in full invoice, with your account number, the repair address, the date range of the high bills, the repair date and a description, within 60 days of the completed leak repair.
- An account that receives a leak adjustment is ineligible for another for the next 12 months.
- An account may not qualify if, during the high-volume period, a swimming pool was filled or new landscape was established.
Billing questions go to Fort Worth Water at 817-392-4477.
What the City's permit page says
The City's residential permit page states that changing, installing, moving or repairing plumbing, including water heaters and shower pans, requires a plumbing permit. It does not mention slab leaks or private service lines by name. The same page says all foundation repairs or new foundations for residential structures require building permits and engineered building plans; it does not say whether a plumbing repair under a slab counts as foundation repair. Ask the plumber which permit, if any, they will pull, and put that in the written quote. Development Services' Customer Center is on the 5th floor of City Hall, 100 Fort Worth Trail, and its walk-in line is 817-392-2222.
Hiring a plumber
The Texas State Board of Plumbing Examiners licenses plumbers. Run the name or number on the quote through its Public License Search. Ask whether the price covers detection only or detection and repair.
Insurance
TDI separates sudden water damage from slow damage. Most homeowner and renters policies cover sudden and accidental water damage, while policies usually won't cover damage from gradual leaks. Its homeowners guide lists a continuous water leak among the risks most policies don't cover. Ask your insurer which side your claim falls on before flooring or walls come out. TDI Help Line: 800-252-3439, Monday to Friday.
National costs
| Step | Figure |
|---|---|
| Slab leak detection test | $100 to $400 (Fixr national) |
| Slab leak repair | $1,000 to $4,000; $2,500 national average (Fixr) |
Fixr's figures are national. Fixr says the detection price depends on how invasive the detection needs to be. This guide has no Fort Worth figure.
When you call: 4 questions to ask
- Is there a call-out charge, and is it folded into the job if I go ahead?
- Will you give me one fixed price before any work starts?
- Does your price cover the Fort Worth plumbing permit?
- Which Texas State Board of Plumbing Examiners license do you hold, and under what number?
A fair written quote shows materials, labor, the permit, disposal of the old unit, and written warranty terms. Check any contractor's license on the TDLR license search before work starts.
What happens when you call
- You're connectedStraight to a local plumber that serves your area and takes calls like yours.
- You get a priceDescribe the problem, ask for a written quote and their license number. No obligation.
Common questions
Who pays to fix a slab leak in Fort Worth?
The property owner. Fort Worth Water owns the line from the main to the meter and the meter; the owner is responsible from the meter to the building inlet.
Will Fort Worth Water credit my bill for a leak?
A hidden leak beyond your control may qualify. Up to two consecutive billing periods may receive an adjustment equal to 50 percent of the difference above average use. Send the repair receipt within 60 days of the completed repair.
How do I check for a hidden leak?
EPA WaterSense says to read the meter before and after a two-hour period with no water in use; if it changes at all, you probably have a leak. These checks don't show where the leak is; a plumber's slab leak detection test does that.
How much does slab leak repair cost?
Fixr's national range for slab leak repair is $1,000 to $4,000, with a national average of $2,500. A slab leak detection test is $100 to $400.
Related guides
Sources
- Fort Worth Water: Service line inventory
- Fort Worth Water: Main breaks
- Fort Worth Water: Leak checklist (PDF)
- EPA WaterSense: Fix a Leak Week
- Fort Worth Water: Leak adjustments
- City of Fort Worth Development Services: Residential permit information
- City of Fort Worth Development Services: Walk-in customer center
- Texas State Board of Plumbing Examiners
- TSBPE Public License Search
- Texas Department of Insurance: When are water damage and mold covered by insurance
- Texas Department of Insurance: Homeowners insurance guide
- Texas Department of Insurance: Storm recovery tips and Help Line
- Fixr: Slab leak repair cost (national)
Costs are typical ranges. Your quote depends on your home. Rules and rebates change; check the original source before you rely on a figure. Something wrong? Tell us via the contact on the Impressum page.