A breaker trips to protect the wiring. Usually it's too much on one circuit, sometimes a short in a cord or device, and sometimes a worn-out breaker. Unplug things on that circuit, reset once, and add loads back one at a time. If it trips with nothing plugged in, or you smell burning, leave it off and call an electrician. In the City of Greenville, swapping a breaker for one of the required capacity in the same location is a listed permit exception; most other electrical work is not on the list, so plan on a permit; confirm with 864-467-4505.

Key facts
- Overload
- Trips when several devices run together
- Short
- Trips right away, often with one device
- Ground fault
- GFCI or bathroom, kitchen, outdoor circuits
- Reset rule
- Once; if it trips again with nothing on it, call
- City exception
- Same-capacity breaker swap, same location
- License
- RBE, SC LLR Residential Builders Commission
- 200-amp upgrade
- $1,800–$4,500 (Fixr, national)
Find the pattern
| When it trips | Likely cause | Try this |
|---|---|---|
| Space heater, hair dryer or microwave running with other things | Overload | Move one appliance to another circuit |
| The instant one device is plugged in or switched on | Short in that device or cord | Stop using it; have it checked |
| Kitchen, bathroom or outdoor outlets, often when wet | Ground fault | Dry things out; press the GFCI reset; call if it won't hold |
| With nothing plugged in at all | Wiring fault or failing breaker | Leave it off; call an electrician |
| The AC or heat pump circuit | Equipment fault | See AC not cooling; call for service |
Safe checks
- Unplug or switch off everything on the circuit, then reset the breaker: push it fully to Off, then to On.
- Add things back one at a time and note what trips it.
- Feel the breaker and outlet covers. Warmth, scorch marks or a burning smell mean stop and call.
- Only touch the panel with dry hands, standing on a dry floor. Don't open the cover.
Want a price for your home? Call a local electrician for a written quote.
Phone line opening soonGreenville rules for the fix
The City of Greenville's permit page lists replacing branch circuit overcurrent devices of the required capacity in the same location as an exception, along with reinstallation of attachment plug receptacles (but not the outlets) and minor repair work such as replacing lamps. So swapping a breaker for one of the required capacity in the same location is on the exception list; a new circuit or a panel change isn't, so plan on a permit; confirm with 864-467-4505. Residential electricians in South Carolina hold the RBE license from the SC LLR Residential Builders Commission (licensee lookup).
If the panel is simply full or undersized, see the panel upgrade page: Fixr's 200-amp row puts that at $1,800 to $4,500 nationally.
Whole house dark?
If your neighbors are out too, it's not your breaker. Report it to Duke Energy at 800.POWERON (800.769.3766). A line on the ground means stay away and call 911.
What a repair usually costs
National ranges from cost publishers, not Greenville quotes. The fault decides the price, so ask for it in writing before work starts.
| Job | National range | Source |
|---|---|---|
| Replacing a circuit breaker | $100 to $260 | HomeGuide |
When you call: 4 questions to ask
- What's your Residential Specialty Contractor Electrical (RBE) license number?
- Who pulls the City electrical permit for this work?
- Will you coordinate the disconnect with Duke Energy?
- Is the trip charge credited if I go ahead?
A fair written quote shows the panel or parts, labor, the permit and inspection, with extra circuits priced on their own lines. Check any contractor's license on the SC LLR Residential Builders Commission licensee lookup before work starts.
What happens when you call
- You're connectedStraight to a local electrician that serves your area and takes calls like yours.
- You get a priceDescribe the problem, ask for a written quote and their license number. No obligation.
Common questions
Why does my breaker keep tripping?
Most often too many devices on one circuit. A short in a device or cord, a ground fault, or a worn breaker can also cause it.
Can I replace a breaker without a permit in Greenville?
The City lists replacing branch circuit overcurrent devices of the required capacity in the same location as an exception. New circuits or panel work aren't on the City's exception list (a breaker swap qualifies only if it is the required capacity in the same location), so plan on a permit; confirm with 864-467-4505.
When should I call an electrician about a tripping breaker?
If it trips with nothing plugged in, trips again right after a reset, or you notice heat, scorch marks or a burning smell.
Who licenses electricians in South Carolina?
For residential work, the SC LLR Residential Builders Commission issues the Residential Specialty Contractor Electrical License (RBE).
Related guides
Sources
- City of Greenville: Do You Need A Permit?
- SC LLR Residential Builders Commission: Licensure
- SC LLR Residential Builders Commission: Licensee Lookup
- Fixr: Electrical panel upgrade cost
- Duke Energy news release, March 15, 2026: preparing for damaging high winds across the Carolinas
Costs are typical ranges. Your quote depends on your home. Rules and rebates change; check the original source before you rely on a figure. Something wrong? Tell us via the contact on the Impressum page.