Local Repair FinderGreenville, SC home repair guide

Upgrading an electrical panel in Greenville

Greenville & Greenville County · Reviewed November 2026 · Checked against 6 public sources

Breaker trouble, a burning smell or a panel upgrade?

Talk to a local electrician now. Free, no obligation.

Phone line opening soon
  • Free to call
  • No obligation
  • Local Greenville companies
  • Ask for a written quote

Fixr's cost table puts upgrading to 200-amp service at $1,800 to $4,500, a national figure. City of Greenville code requires a permit to replace an electrical system, and a panel upgrade isn't on the City's exception list, so plan on a permit; confirm with 864-467-4505. Duke Energy serves Greenville (the county sheet also lists Laurens Electric; check your bill).

Closed electrical panel on a basement wall with metal conduit running into the top

Key facts

Upgrade to 200-amp service
$1,800–$4,500 (Fixr, 200-amp row, national)
Permit
City code: required to replace an electrical system
Not a panel exception
Same-capacity breaker swap in the same location is excepted; a panel is not
Electric utility
Duke Energy (county sheet also lists Laurens Electric; check your bill)
License
RBE, SC LLR Residential Builders Commission
Permit questions
Building Codes and Permit Center, 864-467-4505

Signs people start asking about a bigger panel

  • Adding a heat pump, an electric range or a car charger, and the panel has no room left.
  • Breakers that trip under ordinary loads (see breaker keeps tripping).
  • An older panel an inspector or insurer has asked about.

The price, and what's inside it

Fixr's 200-amp row puts the typical upgrade at $1,800 to $4,500 nationally. Quotes vary with the work around the panel: a new meter base or service entrance, grounding, moving the panel, patching walls, and any new circuits. Ask for those as separate lines.

Want a price for your home? Call a local electrician for a written quote.

Phone line opening soon

Steps from quote to power-on

  1. Load and plan. The electrician works out what the house needs now and what you plan to add.
  2. Permit. City code requires a permit to replace an electrical system, and a panel upgrade isn't on the City's exception list, so plan on one. Ask who files it; the City's permit page and the Building Codes and Permit Center (864-467-4505) have the details.
  3. Utility coordination. Service work means the electric utility is involved on its side of the meter. The electrician should arrange that.
  4. Inspection. Keep the permit card and the final sign-off with your house records.

Check the license

Residential electrical work in South Carolina falls under the Residential Specialty Contractor Electrical License (RBE), issued by the SC LLR Residential Builders Commission. Use the licensee lookup.

Rebates

This guide found no panel rebate with a 2026 date. If the upgrade is for a heat pump, check Duke Energy's current rebate page for the heat pump itself; South Carolina's Home Energy Rebates are expected to launch in 2026 and aren't available yet (energy.sc.gov/rebates).

When you call: 4 questions to ask

  1. What's your Residential Specialty Contractor Electrical (RBE) license number?
  2. Who pulls the City electrical permit for this work?
  3. Will you coordinate the disconnect with Duke Energy?
  4. Is the trip charge credited if I go ahead?

A fair written quote shows the panel or parts, labor, the permit and inspection, with extra circuits priced on their own lines. Check any contractor's license on the SC LLR Residential Builders Commission licensee lookup before work starts.

What happens when you call

  1. You're connectedStraight to a local electrician that serves your area and takes calls like yours.
  2. You get a priceDescribe the problem, ask for a written quote and their license number. No obligation.

Common questions

What does a 200-amp panel upgrade cost in Greenville?

Fixr's 200-amp row puts it at $1,800 to $4,500, nationally. A Greenville-only figure isn't available.

Does a panel upgrade need a permit in the City of Greenville?

A panel upgrade isn't on the City's exception list, so plan on a permit; confirm with 864-467-4505. City code requires a permit to replace an electrical system; the exceptions include small items like replacing a breaker with one of the required capacity in the same location.

Is there a rebate for a panel upgrade?

This guide found no 2026-dated panel rebate. South Carolina's Home Energy Rebates are expected to launch in 2026 but aren't available yet.

Related guides

Sources

  1. Fixr: Electrical panel upgrade cost
  2. City of Greenville: Do You Need A Permit?
  3. Greenville County Building Safety: Utility contacts and services (rev. September 29, 2026)
  4. SC LLR Residential Builders Commission: Licensure
  5. SC LLR Residential Builders Commission: Licensee Lookup
  6. South Carolina Office of Regulatory Staff, Energy Office: Home energy rebates

Costs are typical ranges. Your quote depends on your home. Rules and rebates change; check the original source before you rely on a figure. Something wrong? Tell us via the contact on the Impressum page.