A breaker trips to protect the wiring, so treat it as a message. Unplug what is on that circuit, switch the breaker fully off and back on once, then plug things in one at a time to see what sets it off. If it trips again with nothing connected, or you notice heat, buzzing or a burning smell at the panel, leave it off and call a licensed electrician.

Key facts
- First
- Unplug or switch off everything on the dead circuit
- Reset
- Fully Off, then On, one time
- Test
- Add devices back one by one
- Leave it off if
- It trips with nothing plugged in, or the panel is hot or smells
- License to ask for
- Texas electrician license (TDLR)
- City storm repair guide
- All electrical work requires a permit and a licensed electrical contractor registered with the City
- Panel upgrade
- $1,800–$4,500 for 200A (national, Fixr)
Safe first checks
- Work out what went dark. Note which rooms, outlets and appliances lost power. That is the circuit the breaker serves.
- Unplug everything on it. Space heaters, hair dryers, microwaves, window units and vacuums are the usual heavy hitters. Turn off the lights on that circuit too.
- Reset the breaker once. Stand on a dry floor, open the panel door, and find the handle that sits out of line with the rest. Push it firmly to Off, then to On. Touch only the breaker handles; the metal cover behind them stays on.
- Bring things back one at a time. Plug in a single item, wait, then the next. If the breaker goes when one particular device starts, that device or its cord is suspect. If it goes when several run together, the circuit is overloaded.
- Spread the load. Move a heavy appliance to an outlet in another room, on a different circuit, and see whether the tripping stops.
- Press the test and reset buttons on GFCI outlets. In kitchens, bathrooms, garages and outdoors, a dead outlet may have tripped at the outlet and not at the panel.
- Inspect cords and plugs. Melted plastic, scorch marks or a cracked cord means that item goes in the bin, not back in the wall.
Want a price for your home? Call a local electrician for a written quote.
Phone line opening soonStop and call a pro when
- The breaker trips straight away with nothing plugged in.
- It has tripped again after your single reset and you can't tie it to one device.
- The panel, a breaker or an outlet feels warm, buzzes, crackles or smells of burning.
- You see scorch marks, rust or moisture in or around the panel.
- Lights dim or flicker across the house when large appliances start.
- The main breaker trips, cutting power to the whole home.
Do not keep resetting, do not tape a handle in place and do not swap in a larger breaker. Each of those removes the protection that is preventing a fire. If you see smoke or flames, get out and call 911.
Is it your house or the grid?
A breaker handle out of position means the fault is on your side. If every breaker is on and the house is still dark, or the neighbors are out too, the problem is with delivery. CenterPoint Energy maintains the wires, poles and electric infrastructure in the Greater Houston area; report an outage or a downed line at 713-207-2222. Your retail electric provider sends the bill but does not repair lines.
Summer load in Houston
The normal July high at Bush Intercontinental is 94.5 °F, and extreme heat is rated High in the City's hazard plan. Air conditioners run long hours in that weather. A breaker that only trips on hot afternoons, when the AC, the dryer and the oven overlap, is telling you the circuit or the panel is near its limit. If it is the AC's own breaker, see AC not cooling as well.
Houston's rules for electrical work
The City's storm repair guide is blunt: all electrical work requires a permit and must be completed by a licensed electrical contractor. The Houston Permitting Center's Circuit Panel Permit page adds that registered electrical contractors who install or re-wire circuit breakers must request an electrical permit, and that electrical permits are issued only to registered master electricians. No homeowner electrical permit appears on the City's listings. In practice, replacing a breaker or adding a circuit is not a do-it-yourself job here. The permits page has more.
The license to ask for
Electricians in Texas are licensed by the Texas Department of Licensing and Regulation. Search the company or the individual on the TDLR License Data Search before the appointment.
If the answer is a bigger panel
Sometimes repeated tripping traces back to a panel that is too small for the house. Fixr's national figure for a 200-amp panel upgrade is $1,800 to $4,500. That is national data, not Houston pricing, and no verified Houston figure for smaller repairs is listed here; a national breaker range is below. The panel upgrade cost page goes through what drives the price.
What a repair usually costs
National ranges from cost publishers, not Houston quotes. The fault decides the price, so ask for it in writing before work starts.
| Job | National range | Source |
|---|---|---|
| Replacing a circuit breaker | $100 to $260 | HomeGuide |
When you call: 4 questions to ask
- Can I have your TDLR electrical license number?
- Is the City electrical permit for the breaker panel part of the price?
- Is there room in the new panel for a generator inlet or more circuits later?
- Is the service-call charge taken off the final bill?
A fair written quote shows the panel and breakers, labor, the permit and inspection, with any extra wiring priced on its own line. Check any contractor's license on the TDLR license search before work starts.
What happens when you call
- You're connectedStraight to a local electrician that serves your area and takes calls like yours.
- You get a priceDescribe the problem, ask for a written quote and their license number. No obligation.
Common questions
Why does my breaker keep tripping?
Usually because too much is running on one circuit, a device or cord is faulty, or there is a wiring fault. Unplugging everything and adding items back one at a time separates the first two from the third.
Is it safe to keep resetting a breaker?
No. Reset it once. A breaker that trips again is detecting a real problem, and forcing it back on lets wiring overheat.
Who do I call if my whole house loses power in Houston?
If your main breaker is on and the power is still out, report it to CenterPoint Energy at 713-207-2222 or 800-332-7143. If the main breaker itself tripped, call an electrician.
Can I replace a breaker myself in Houston?
The City says all electrical work requires a permit and a licensed electrical contractor, and electrical permits go only to registered master electricians.
Related guides
Sources
- Houston Permitting Center: Storm damage repair permit guide (rev. May 2024)
- Houston Permitting Center: Circuit panel permit
- Texas Department of Licensing and Regulation: Electricians
- TDLR License Data Search
- CenterPoint Energy: Where we serve
- CenterPoint Energy: Reporting an outage or emergency
- National Weather Service: Houston Bush Intercontinental (IAH) normals, July (1991-2020)
- City of Houston Office of Emergency Management: Hazard Mitigation Plan Update (2023-2028)
- Fixr: Electrical panel upgrade cost (national)
Costs are typical ranges. Your quote depends on your home. Rules and rebates change; check the original source before you rely on a figure. Something wrong? Tell us via the contact on the Impressum page.