The Tennessee Department of Health says porous surfaces with mold, such as sheet rock or carpet, will likely need to be replaced, and that painting or caulking over mold will not solve the problem. EPA puts the drying window at 24-48 hours after water gets in, and says a patch under about 10 square feet is, in most cases, a job you can handle yourself. Fixr's national figures: inspection $450 to $800, remediation an average range of $1,500-$9,000.
Key facts
- Porous materials
- Sheet rock or carpet with mold will likely need replacing (TN Dept of Health)
- Painting over it
- Will not solve the problem (TN Dept of Health)
- Drying window
- 24-48 hours (EPA)
- Do it yourself
- Under about 10 sq ft, in most cases (EPA)
- Heating and cooling
- Don't run the HVAC system if you know or suspect mold in it (EPA)
- Inspection
- $450–$800, national average $500 (Fixr)
- Remediation
- $1,500–$9,000 average range, national average $3,500 (Fixr)
In brief: stop the water, dry what you can inside two days, size up the growth, and replace soaked soft materials rather than covering them.
What Tennessee's health department says
The Tennessee Department of Health mold page is short and practical. If the surface affected by mold is porous such as sheet rock or carpet, it will likely need to be replaced. Painting or caulking over mold will not solve the problem.
In Metro's 2025 hazard assessment, flooding sits first among Davidson County's top ten hazards, with winter storms third.
Working through it
- End the water first. A plumber, roofer or HVAC technician has to stop the source, or anything you clean gets wet again.
- Race the clock. EPA's brief guide to mold and moisture says it is important to dry water-damaged areas and items within 24-48 hours, and that if wet materials are dried in that time, in most cases mold will not grow.
- Measure what you see. On its mold cleanup in your home page EPA draws the line at less than about 10 square feet, roughly a 3 ft. by 3 ft. patch; below that, it says, in most cases you can handle the job yourself.
- Bigger than that, get help. Where there has been a lot of water damage, and/or growth covers more than 10 square feet, EPA refers readers to its guide Mold Remediation in Schools and Commercial Buildings. That is the point to bring in a professional.
- Leave the system off if it's suspect. EPA says not to run the HVAC system if you know or suspect it is contaminated with mold.
- Keep a record. Photos and dates of the leak, the drying and the growth help with any claim.
Want a price for your home? Call a local water damage crew for a written quote.
Phone line opening soonInsurance
The Tennessee Department of Commerce and Insurance's advice after Winter Storm Fern was to file your insurance claim as soon as possible. That release says nothing about mold, and this guide has no Tennessee regulator statement on whether homeowners policies pay for it. Ask your insurer directly and read the mold wording in your own policy. Consumer Insurance Services answers on (615) 741-2218 or (800) 342-4029.
Who to hire and how to check them
This guide has no Tennessee rule on licensing mold inspectors or remediation firms, so it says nothing either way. The rebuilding that follows is ordinary contracting: in Davidson County, one of nine counties listed on the state's contractor consumer tips page, a Home Improvement Contractor's license is required for projects $3,000 to $24,999. Search any name on Tennessee's license search before you sign, and get the removal scope in writing. The guide does not vouch for any company it connects you with.
When you call: 4 questions to ask
- Which rooms and materials are wet, and how did you check?
- Do you deal with the adjuster, or do I?
- Is putting things back included, or only drying?
- What's the daily rate for drying equipment?
A fair written quote shows extraction, tear-out, daily equipment charges and dated photos, each on its own line. Check any contractor's license on the Tennessee license search before work starts.
What happens when you call
- You're connectedStraight to a local water damage crew that serves your area and takes calls like yours.
- You get a priceDescribe the problem, ask for a written quote and their license number. No obligation.
Common questions
Can I just paint over mold?
No. The Tennessee Department of Health says painting or caulking over mold will not solve the problem.
Does moldy drywall have to come out?
The Tennessee Department of Health says porous surfaces affected by mold, such as sheet rock or carpet, will likely need to be replaced.
How fast do I need to dry things after a leak?
EPA says to dry water-damaged areas and items within 24-48 hours to prevent mold growth.
Is mold covered by homeowners insurance in Tennessee?
The guide has no Tennessee regulator statement on mold coverage. Check your policy and ask your insurer, and file the claim as soon as possible, as the state's insurance department advises.
Related guides
Sources
- Tennessee Department of Health: Healthy Homes, mold
- Metro Nashville Office of Emergency Management: Planning and hazard assessment
- EPA: A brief guide to mold, moisture and your home
- EPA: Mold cleanup in your home
- Tennessee Department of Commerce and Insurance: Insurance, safety and contractor information after Winter Storm Fern (January 30, 2026)
- Tennessee Department of Commerce and Insurance: Insurance Division contact
- Tennessee Board for Licensing Contractors: Consumer tips
- Tennessee Department of Commerce and Insurance: License search
- Fixr: Mold inspection cost (national)
- Fixr: Mold remediation cost (national)
Costs are typical ranges. Your quote depends on your home. Rules and rebates change; check the original source before you rely on a figure. Something wrong? Tell us via the contact on the Impressum page.