Gas heater: check the pilot and that the gas is on elsewhere in the house. Electric: check the breaker. On a cold morning, a frozen supply line can also be the cause; the normal January low at the BYU station is 23.5 °F. A replacement needs a Provo building permit.

Key facts
- Gas heater
- Pilot out? Gas on at other appliances?
- Electric heater
- Breaker tripped?
- Winter
- Frozen line to the heater possible
- Gas smell
- Leave; Enbridge Gas Utah 1-800-767-1689 and 911
- Permit to replace
- Required (Provo City)
Find your path
- You have a gas heater and smell gas
- Stop. Leave the house, then call Enbridge Gas Utah at 1-800-767-1689 and 911 from a safe place.
- Gas heater, no smell
- Look through the window at the bottom of the heater. No flame? Follow the relighting steps on the heater's label exactly. If it won't stay lit, call a plumber. Check that the stove or furnace has gas too; if nothing gas works, ask Enbridge Gas Utah.
- Electric heater
- Check its breaker. If it tripped, reset once. A second trip means a fault for a professional.
- Cold snap, no water at some taps
- A line may be frozen. See frozen pipes.
- Hot water runs out fast
- Often sediment or a failed part in an older tank. A plumber can test it.
- Water around the base
- See leaking water heater.
Want a price for your home? Call a local plumber for a written quote.
Phone line opening soonIf the heater is done
Fixr's national average range for a tank-style gas water heater is $1,000 to $2,700. Provo requires a building permit to replace one. The 2026 ThermWise water heating form pays $100 for a gas storage heater, $300 for tankless, and $350 for condensing storage or a qualifying hybrid, in existing homes with one to three units. There's no line for a heat pump water heater on that form.
Licensed help
Plumbing contractors in Utah hold DOPL classification P200 or P201. Look up the company on DOPL license verification.
What a repair usually costs
National ranges from cost publishers, not Provo quotes. The fault decides the price, so ask for it in writing before work starts.
| Job | National range | Source |
|---|---|---|
| Water heater repair | $150 to $750 | Fixr, updated Aug 2025 |
When you call: 4 questions to ask
- Provo requires a building permit for a new water heater: will you pull it?
- Which 2026 ThermWise line does this heater qualify for?
- Do you hold a P200 or P201 license with DOPL?
- Is the problem on my side of the meter box or the city's?
A fair written quote shows the heater or repair, labor, the permit, removal of old equipment and the written warranty. Check any contractor's license on DOPL license verification before work starts.
What happens when you call
- You're connectedStraight to a local plumber that serves your area and takes calls like yours.
- You get a priceDescribe the problem, ask for a written quote and their license number. No obligation.
Common questions
Why do I have no hot water?
For gas heaters, the pilot or gas supply; for electric, often a tripped breaker. In cold weather, a frozen supply line is another cause.
Does Provo require a permit for a new water heater?
Yes. Provo says replacing water heaters requires a building permit.
Can I relight a water heater pilot myself?
Follow the instructions printed on the heater exactly. If you smell gas, don't try; leave and call Enbridge Gas Utah and 911.
Related guides
Sources
- Enbridge Gas: Smell gas? Safety steps for Utah, Wyoming and Idaho
- NOAA 1991–2020 normals for Provo (BYU campus station), as tabulated in Wikipedia's Provo, Utah article
- Fixr: Gas water heater cost
- Provo City: Water heater, furnace and AC installation or replacement
- Enbridge Gas Utah: 2026 ThermWise water heating rebate application
- Utah Division of Professional Licensing: Contractor license application
- Utah Division of Professional Licensing: License verification
Costs are typical ranges. Your quote depends on your home. Rules and rebates change; check the original source before you rely on a figure. Something wrong? Tell us via the contact on the Impressum page.