The City of Raleigh maintains water lines up to your property line; from there to your house, the pipe is your responsibility, so the repair is a job for your plumber. Raleigh Water's leak brochure says to make sure no water is in use, then watch the red triangle on the meter: if it spins, there is a leak. Its leak adjustment requires usage that exceeds your monthly average by at least two times. Fixr's average range for water main repair is $500 - $2,000, a national figure.
Key facts
- City's part
- Water lines up to your property line
- Your part
- Property line to the house
- Main break in the street
- Raleigh Water, 919-996-3245
- Meter check
- No water in use; red triangle spinning means a leak
- Bill adjustment
- Usage at least two times your monthly average; one per twelve months
- Repair
- $500 - $2,000 average range (Fixr, national)
Where your pipe starts
A caption on the City's lead and water system page draws the line: the City of Raleigh maintains water lines up to your property line, and from there to your house, it's your responsibility. Raleigh Water's water service FAQ says it is responsible for breaks in water and sewer mains in the street, reported to Customer Care and Billing at 919-996-3245.
Raleigh Water's meter check
The City's Fix a Leak brochure (undated) walks you through it:
- Watch the bill. Find a leak by checking your water bill regularly and noting any inconsistencies.
- Turn everything off. Make sure no water is being used before you check the meter, for an accurate reading.
- Find the red triangle on the bottom left of the meter. That is the low-flow indicator. If it spins, there is a leak, and the brochure says you will need an audit to find where it is.
- Rule out the toilets. The brochure calls the flapper the most common toilet leak. Put dye tablets or food coloring in the tank, wait 15 minutes, and check for dye in the bowl.
The City has offered FREE leak detection dye tablets among its efficiency incentives. The brochure has no date, so ask Raleigh Water whether they are still available.
Two general leak checks from EPA
EPA WaterSense suggests these for any household leak; they are not specific to a service line:
- Read your water meter before and after a two-hour period when no water is being used. EPA says if the meter changes at all, you probably have a leak.
- Look at your water use in a colder month, such as January or February. If a family of four exceeds 12,000 gallons per month, EPA says there could be serious leaks.
Want a price for your home? Call a local plumber for a written quote.
Phone line opening soonGetting part of the bill adjusted
Raleigh's leak adjustment page describes adjustments as courtesy financial relief for usage charges caused by a leak on the customer's side of the meter. The rules it sets out:
| Rule | What the City says |
|---|---|
| Eligibility | Your water usage must exceed your monthly average by at least two times |
| Accessible leak (one that can usually be seen or heard) | Water consumption charges adjusted to double the monthly average; no adjustment to wastewater consumption charges |
| Non-accessible leak | Water and wastewater consumption charges adjusted to double the monthly average |
| Never adjusted | Base, watershed, and infrastructure replacement fees |
| How often | One leak adjustment per twelve months, including a swimming pool adjustment |
| Proof | A plumber's receipt or other proof of repair |
| Timing | A determination within 7-10 business days; you still pay the entire due amount by the due date |
The page lists email (customercare@raleighnc.gov), fax, mail and an in-person counter for sending the request with your receipt. Read its full list of exclusions before you apply.
Permit for the repair
This guide could not find a published City of Raleigh rule on whether repairing or replacing a private water service line needs a permit. Residential permits in Raleigh go through City of Raleigh Planning and Development and its Permit and Development Portal; ask there before the line is dug up. Check your plumber's license with the state plumbing board's search.
National cost
| Fixr, water main repair | National figure |
|---|---|
| Average range | $500 - $2,000 |
| National average cost | $1,000 |
| Leak repair | $300 - $3,000 |
| Broken section repair | $400 - $2,000 |
Fixr says its costs include labor.
When you call: 4 questions to ask
- The City lists water heater replacement as needing a permit: will you apply, or are you relying on the G.S. 160D-1110(a) exemption, and why?
- Is this leak on my side of the property line or the City's?
- For a gas heater, will you leak test the gas piping when you're done?
- Is the service-call fee credited if I go ahead?
A fair written quote shows the heater or parts, labor, any permit, haul-away of the old tank and the written warranty. Check any contractor's license on the state plumbing, heating and fire sprinkler board's license search before work starts.
What happens when you call
- You're connectedStraight to a local plumber that serves your area and takes calls like yours.
- You get a priceDescribe the problem, ask for a written quote and their license number. No obligation.
Common questions
Who pays to fix the water line to my house in Raleigh?
You do. The City says it maintains water lines up to your property line, and from there to your house it's your responsibility. Breaks in mains in the street are Raleigh Water's.
How do I check my Raleigh water meter for a leak?
Raleigh Water's brochure says to make sure no water is being used, then look at the red triangle on the bottom left of the meter, the low-flow indicator. If it spins, there is a leak.
Can I get my water bill adjusted after a leak?
Possibly. Your usage must exceed your monthly average by at least two times, you need a plumber's receipt or other proof of repair, and you may only receive one leak adjustment per twelve months.
Do I need a permit to fix my water service line in Raleigh?
This guide could not find a published rule. Ask City of Raleigh Planning and Development before work starts.
What does a water line repair cost?
Fixr's average range for water main repair is $500 - $2,000, with a national average cost of $1,000.
Related guides
Sources
- City of Raleigh: Understanding lead and Raleigh's water system (updated April 13, 2026)
- City of Raleigh: Water service FAQ (updated May 22, 2026)
- City of Raleigh: Fix a Leak brochure (undated)
- EPA WaterSense: Fix a Leak Week (last updated March 13, 2026)
- City of Raleigh: Request an adjustment on your utility bill (updated August 20, 2026)
- City of Raleigh Planning and Development: How to get a residential permit
- State Board of Examiners of Plumbing, Heating and Fire Sprinkler Contractors: Consumer awareness
- Fixr: Water main repair cost
Costs are typical ranges. Your quote depends on your home. Rules and rebates change; check the original source before you rely on a figure. Something wrong? Tell us via the contact on the Impressum page.