Turn off every faucet inside and outside, then read the Flow Rate screen on your SAWS meter. SAWS says any number other than zero means leaks exist on your property and need to be located. The meter cannot show where. For a suspected slab leak, a plumber runs a slab leak detection test, which Fixr puts at $100 to $400 nationally. The pipe from the meter into the house belongs to you, and SAWS may credit part of the lost water once it is repaired.
Key facts
- First check
- SAWS meter Flow Rate screen, all taps off
- Pipe past the meter
- Owner's water service line (SAWS)
- Bill credit
- Request within 60 days of repair (SAWS)
- Leak detection test
- $100 to $400 (national, Fixr)
- Slab leak repair
- $1,000 to $4,000 (national, Fixr)
- Gradual leaks
- Usually not covered (TDI)
- Plumber license
- Texas State Board of Plumbing Examiners
Reading the SAWS meter
- Everything off. SAWS says to turn off all inside and outside water faucets. Hold off on the washer, dishwasher, irrigation and ice maker too.
- Flow Rate screen. On the electronic meter, any number other than zero means, in SAWS's words, that leaks exist on your property and need to be located.
- One-hour follow-up. SAWS also suggests noting the Current Total Volume, keeping the water off for an hour and checking the meter again.
- Book detection. A plumber with a slab leak detection test can narrow down where the water is going.
General leak checks from the EPA
EPA WaterSense offers household leak checks. They do not point to a slab leak in particular, but they help rule other leaks in or out:
- Check your water meter before and after a two-hour period when no water is being used. "If the meter changes at all, you probably have a leak."
- Put a few drops of food coloring in the toilet tank. Color in the bowl after 10 minutes means the toilet leaks.
- Look at water use in a colder month such as January or February. If a family of four exceeds 12,000 gallons per month, there could be serious leaks.
Want a price for your home? Call a local plumber for a written quote.
Phone line opening soonWhose pipe it is
The San Antonio Water System calls the part of the service line between the water meter and your interior plumbing the owner's water service line, the property of the owner. Pipes under your slab are past the meter, on that private side, so finding and fixing the leak is your plumber's job, not SAWS's.
The SAWS leak adjustment
SAWS states it has no legal obligation to grant a bill adjustment for water lost to a customer leak. For a leak on your property that has been repaired, you can request one within 60 days of the repair: sign in to your SAWS account and select Other Services. Receipts, from a licensed plumber or for supplies you installed yourself, are optional, or you can give a detailed description of the repair. The SAWS request page also says:
- Water use has to drop or return to normal after the repair.
- SAWS adjusts a portion of the usage caused by the leak for up to two months.
- Review may take up to 30 days; send one request per repair.
- SAWS does not reimburse what the repair cost you.
City permit rules that may apply
San Antonio's plumbing code, Chapter 10, Sec. 10-6, requires a permit to repair or replace a plumbing system. Among its exemptions is "the stopping of leaks in drains, water, soil, waste, or vent pipe", with a proviso: if a concealed pipe is defective and must be removed and replaced with new material, that counts as new work, needing a permit and inspection. The code text does not mention slab leaks by name, so ask your plumber which permit the repair needs and for its number.
Foundation repair has its own bulletin. Development Services Information Bulletin 172 (revised April 7, 2025) says residential foundation repairs are to be designed by, or performed under the engineering guidance of, a professional engineer licensed by the State of Texas. The applicant is the property owner or a City-licensed Residential Building Contractor, and "A double fee will be assessed for failure to apply and obtain a permit before starting work."
Sudden or gradual, for insurance
The Texas Department of Insurance says most homeowner and renters policies cover sudden and accidental water damage, while policies usually won't cover damage from gradual leaks or seepage. Tell your insurer as soon as you find hidden water damage; TDI says you usually must report it within days after you first see it. The TDI Consumer Help Line is 800-252-3439.
National cost figures
| Step | Fixr national figure |
|---|---|
| Slab leak detection test | $100 to $400 |
| Slab leak repair | $1,000 to $4,000, national average $2,500 |
Fixr says detection cost depends on how invasive it needs to be. No San Antonio prices appear in these sources.
Checking the plumber
The Texas State Board of Plumbing Examiners licenses plumbers in Texas. Look the company up in the board's public license search before work starts, and keep the invoice for your SAWS request.
When you call: 4 questions to ask
- What's the trip or diagnostic fee, and is it applied to the job?
- Is the price flat-rate or hourly, and what's the total before you start?
- Will you file the city permit for this job?
- What's your Texas State Board of Plumbing Examiners license number?
A fair written quote shows the parts list, labor, permit, haul-away of old equipment, and the warranty in writing. Check any contractor's license on the TDLR license search before work starts.
What happens when you call
- You're connectedStraight to a local plumber that serves your area and takes calls like yours.
- You get a priceDescribe the problem, ask for a written quote and their license number. No obligation.
Common questions
How do I know if I have a leak under my slab in San Antonio?
Start with the SAWS meter: with all faucets off, any number other than zero on the Flow Rate screen means a leak on your property. The meter cannot say where, so a plumber's slab leak detection test is the next step.
Will SAWS lower my bill after a slab leak?
Maybe. SAWS says it has no legal obligation to adjust, but you can request an adjustment within 60 days of the repair through your SAWS account under Other Services. It covers a portion of the leak usage for up to two months and does not pay for the repair.
Is the pipe under my slab my responsibility or SAWS's?
SAWS describes the line between the meter and your interior plumbing as the owner's water service line, the property of the owner, so repairs past the meter are yours.
How much does slab leak repair cost?
Fixr's national figures are $100 to $400 for a slab leak detection test and $1,000 to $4,000 for repair, with a national average of $2,500.
Related guides
Sources
- San Antonio Water System: Reading your water meter to help identify leaks
- San Antonio Water System: Leak adjustment request
- San Antonio Water System: Lead service line inspection sign-up
- EPA WaterSense: Fix a Leak Week
- City of San Antonio: Chapter 10, Building-Related Codes (effective May 1, 2025)
- City of San Antonio Development Services: Information Bulletin 172, Foundation Repair
- Texas Department of Insurance: When are water damage and mold covered by insurance?
- Texas Department of Insurance: How to reach us
- Texas State Board of Plumbing Examiners: License types
- Fixr: Slab leak repair cost
Costs are typical ranges. Your quote depends on your home. Rules and rebates change; check the original source before you rely on a figure. Something wrong? Tell us via the contact on the Impressum page.